rePaper - 2.7" Graphic eInk Development Board

Art.Nr.:
EXP-R15-187
Lagerbestand:
16 Stück
39,95 EUR
inkl. 19% MwSt. zzgl. Versand


Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And finally our desires have been fulfilled with the rePaper 2.7" development board from Pervasive Displays! We're excited to offer this very interesting display breakout for hackers who want to start playing with small eInk displays. 

This kit comes with a driver board that is powered from 3V and has level shifting on all the I/O pins so it can be used with 5V microcontrollers such as the Arduino. The PCB also has a lot of driver circuitry required to keep the display running smoothly such a temperature sensor, FLASH memory and ZIF socket. All signals are broken out to a 20 male socket header on the left. A 20 pin socket/socket cable is included to make wiring easier and there's also some extra-long header so you can plug these wires into Arduino header or a breadboard. 

The display is 2.7" diagonal and 264 x 176 resolution true eInk graphical display. These are intended for use as small dynamic signage in grocery stores since a barcode displayed on it can be scanned by a laser barcode-reader. The display does not require any power to keep the image and will stay 'on' without any power connection for many days before slowly fading. Of course, its also daylight readable and is very high contrast. This makes it excellent for data-logging applications, outdoor displays, or any other ultra-low power usages 

The good news is that rePaper/PDI have provided a suite of example code for Arduino UNO/Leonardo as well as the MSP430 Launchpad and also have a site with some documentation on how to wire up the displays and datasheets. However, please note: the displays are quite large pixel-wise and to dynamically write to the display requires 3K of RAM - more than the Arduino Uno or Leo/Launchpad so for those boards, the example code only displays what is stored in a 8-pin FLASH chip in the devboard. (By default that FLASH contains a picture of a cat and some imaged text, see photos above) 

If you want to draw 'dynamically' (lines, circles, text, etc) you will need an Arduino Mega (Due not tested at this time. Check our tutorial for information on how to wire to a Mega so that you can use the Adafruit GFX library for drawing. 


Technical Details:
  • Outline Dimension: 70.42(H) x 45.80(V) x 1.00(T) mm
  • Active Area: 57.288(H) x 38.192(V) mm
  • Driver Element: a-Si TFT active matrix
  • FPL: V110
  • Pixel Number: 264 x 176 pixel
  • Pixel Pitch: 0.217 x 0.217 (117dpi) mm
  • Pixel Arrangement: Vertical stripe
  • Display Colors: Black/White
  • Surface Treatment: Anti-Glare
Documents:

Verwandte Produkte:

rePaper - 2.0" Graphic eInk Development Board

rePaper - 2.0" Graphic eInk...

34,95 EUR
Seeedstudio E-Ink Display Shield

Seeedstudio E-Ink Display Shield

45,12 EUR
rePaper - 1.44" Graphic eInk Development Board

rePaper - 1.44" Graphic eInk...

32,95 EUR
Kunden, welche diesen Artikel bestellten, haben auch folgende Artikel gekauft:

16x32 RGB LED matrix panel

16x32 RGB LED matrix panel

38,03 EUR
Lithium Polymer Akku - 6Ah

Lithium Polymer Akku - 6Ah

38,54 EUR
Sparkfun USB LiPoly Charger - Single Cell

Sparkfun USB LiPoly Charger - Single...

14,23 EUR
Jumper Wire - 0.1" 2-pin 300mm F/F Pack of 10

Jumper Wire - 0.1" 2-pin 300mm...

1,90 EUR
F/F 200mm Jumper Wires (40 Stück)

F/F 200mm Jumper Wires (40 Stück)

4,20 EUR
XBee to DIP Adapter with connectors

XBee to DIP Adapter with connectors

2,86 EUR
GA1A12S202 Log-scale analoger Licht-Sensor

GA1A12S202 Log-scale analoger...

3,76 EUR
40 Pin Break Away Headers - Straight (Gelb)

40 Pin Break Away Headers - Straight...

1,00 EUR
USB Micro-B Connector Breakout Board

USB Micro-B Connector Breakout Board

1,75 EUR
M/M 200mm Jumper Wires (40 Stück)

M/M 200mm Jumper Wires (40 Stück)

4,60 EUR
3 Pin Jumper Wire

3 Pin Jumper Wire

0,40 EUR
USB Power Gauge Mini-Kit

USB Power Gauge Mini-Kit

9,47 EUR
RFu-328-BARE - Arduino ATMega 328 compatible micro board RFu 328

RFu-328-BARE - Arduino ATMega 328...

5,59 EUR
Grove - MOSFET

Grove - MOSFET

3,71 EUR
DC Barrel Jack Adapter - Male

DC Barrel Jack Adapter - Male

1,40 EUR
Female DC Power adapter - 2.1mm jack to screw terminal block

Female DC Power adapter - 2.1mm jack...

1,91 EUR
SD/MICRO-SD Card Breakout Module

SD/MICRO-SD Card Breakout Module

4,76 EUR
Keypad - 12 Button COM-08653

Keypad - 12 Button COM-08653

3,56 EUR
Brass Stud M4x16 (10-Pack)

Brass Stud M4x16 (10-Pack)

2,20 EUR
ADS1015 12-Bit ADC - 4 Channel with Progrmmable Gain Amplifier

ADS1015 12-Bit ADC - 4 Channel with...

9,47 EUR
USB Mini-B Connector Breakout Board

USB Mini-B Connector Breakout Board

1,75 EUR
Brass Stud M4x8+6 (10-Pack)

Brass Stud M4x8+6 (10-Pack)

1,76 EUR
2x25 Pin Break Away Headers - Straight (Schwarz)

2x25 Pin Break Away Headers -...

1,20 EUR
USB Type A Female Breakout

USB Type A Female Breakout

3,95 EUR
3x4 Right Angle Male Header - 4 pack

3x4 Right Angle Male Header - 4 pack

2,95 EUR
Foca V2.2 FT232RL Tiny Breakout USB to Serial UART Interface

Foca V2.2 FT232RL Tiny Breakout USB...

7,80 EUR
Sealed Membrane 4x4 Button Pad with Sticker

Sealed Membrane 4x4 Button Pad with...

4,52 EUR
Seeedstudio Grove - Temperatursensor

Seeedstudio Grove - Temperatursensor

2,90 EUR
Electronic Brick - Temperature Sensor Brick

Electronic Brick - Temperature Sensor...

2,38 EUR
Break Away Male Headers - Right Angle

Break Away Male Headers - Right Angle

1,50 EUR
SMT Breakout PCB Set For SOT-23, SOT-89, SOT-223 and TO252

SMT Breakout PCB Set For SOT-23,...

4,72 EUR
40 Pin Break Away Headers - Straight (Schwarz)

40 Pin Break Away Headers - Straight...

1,00 EUR