0Artikel

Sie haben keine Artikel in Ihrem Einkaufswagen.



Product was successfully added to your shopping cart.
  • Adafruit 4-channel I2C-safe Bi-directional Logic Level Converter - BSS138

Adafruit

Adafruit 4-channel I2C-safe Bi-directional Logic Level Converter - BSS138

Hersteller: Adafruit | Mehr von Adafruit
Artikelnummer: EXP-R15-013
Hersteller-Artikelnummer: 757

Verfügbarkeit: Auf Lager
Lagerbestand: 46

Lieferzeit: 2-3 Tage

Gewicht: 4 g

3,95 €
Inkl. 19% USt., zzgl. Versandkosten

Details

Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V. 

We do have some other handy level shifters in the shop, from the DIP 74LVC245 to the fancy bi-directional TXB0108. However, neither of these are happy to work with I2C, which uses a funky pull-up system to transfer data back and forth. This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note. 

This breakout has 4 BSS138 FETs with 10K pullups. It works down to 1.8V on the low side, and up to 10V on the high side. The 10K's do make the interface a little more sluggish than using a TXB0108 or 74LVC245 so we suggest checking those out if you need high-speed transfer. 

While we designed it for use with I2C, this works great for SPI, TTL Serial, and any other digital interface both uni-directional and bidirectional. Comes with a fully assembled, and tested PCB with 4 full bidirectional converter lines as well as 2 pieces of 6-pin header you can solder on to plug into a breadboard or perfboard.

Documents: