0Artikel

Sie haben keine Artikel in Ihrem Einkaufswagen.

Product was successfully added to your shopping cart.

  • Wires with Pre-crimped Terminals 50-Piece Rainbow Assortment F-F 6" (15cm)

Pololu

Wires with Pre-crimped Terminals 50-Piece Rainbow Assortment F-F 6" (15cm)

Hersteller: Pololu | Mehr von Pololu
Artikelnummer: EXP-R25-265
Hersteller-Artikelnummer: 1800

Verfügbarkeit: Auf Lager
Lagerbestand: 7

Lieferzeit: 2-3 Tage

Gewicht: 32 g

9,95 €
Inkl. 19% USt., zzgl. Versandkosten

Details

These wires with pre-crimped terminals are equivalent to our premium jumper wires without the 1×1 crimp connector housings on the ends. By combining these wires with our crimp connector housings, you can quickly and easily create custom cables with 0.1" (2.54mm) connectors that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings (note: it’s not easy to get the wires back out, so plan carefully!). No soldering is required!
You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other (an example of this is shown in the picture to the right); you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy, as shown in the motor picture below.
The wires are available in six lengths—3" (7.5 cm), 6" (15 cm), 12" (30 cm), 24" (60 cm), 36" (90 cm), and 60" (150 cm)—and in ten colors:
  • black
  • brown
  • red
  • orange
  • yellow
  • green
  • blue
  • purple
  • gray
  • white
These are the same colors as those used on resistor color codes and rainbow ribbon cable. The wire packs of different lengths include different quantities of wires. The table below shows the quantity included for a particular length-color combination:

lengthmonochromatic pack quantityrainbow pack quantity
3" 50 (5 of each color)
6" 10 50 (5 of each color)
12" 10 50 (5 of each color)
24" 5 50 (5 of each color)
36" 5 20 (2 of each color)
60" 2 10 (1 of each color)

These wires can be purchased with male terminals on both ends, female terminals on both ends, or one male and one female terminals. These crimped terminals are designed for use with 0.1" (2.54 mm) male headers and female headers, solderless breadboards, and prototyping PCBs. Note that we also sell the crimp pins by themselves if you want to crimp your own wires.
Specification:
  • Length: 15cm
  • Gender: Female-Female
  • Color: rainbow pack