Vorschau: Adafruit-USB-DC-Solar-Lipo-Charger-USB-C_1.jpg

Vorschau: Adafruit-USB-DC-Solar-Lipo-Charger-USB-C_2.jpg

Vorschau: Adafruit-USB-DC-Solar-Lipo-Charger-USB-C_3.jpg

Vorschau: Adafruit-USB-DC-Solar-Lipo-Charger-USB-C_4.jpg

Vorschau: Adafruit-USB-DC-Solar-Lipo-Charger-USB-C_5.jpg

Adafruit USB / DC / Solar Lithium Ion/Polymer charger Rev C

17,50 € *

zzgl. MwSt. zzgl. Versandkosten

5 Stück sofort versandfertig

Hersteller: Adafruit
Artikel-Nr.: EXP-R15-1507
Herstellernummer: 390-Rev-C
Herkunftsland: CN
Zolltarifnummer: 85423190
Gewicht (kg): 0.02

This specialized USB/Solar Lithium Ion Polymer Battery charger is perfect for outdoor projects.... mehr

Menü schließen

This specialized USB/Solar Lithium Ion Polymer Battery charger is perfect for outdoor projects. It comes with an assembled charger board, a 2-pin JST cable that will fit into either the BATT or LOAD ports, and a large stabilization capacitor that must be installed in your finished project. Does not come with a Lipoly battery or solar panel.

Features:

3.7V/4.2V Lithium Ion or Lithium Polymer battery charger
Charge with 5-6V DC, USB-C or 6V solar panel!
Automatic charging current tracking for high efficiency use of any wattage solar panel
Use any 6V solar panel
Three color indicator LEDs - Power good, Charging and Done
Low Battery Indicator (fixed at 3.1V) with LED output
Set for 500mA max charge rate, can be adjusted from 50mA up to 1A by soldering in a resistor
Will always draw the most current possible from a solar cell - up to the max charge rate!
Smart load sharing automatically uses the input power when available, to keep battery from constantly charging/discharging
Temperature monitoring of battery by soldering in a 10K NTC thermistor (not included) - suggested for outdoor projects where the battery may get hot (50°C) or cold (0°C).

Links