Dear customers,

EXP Tech will be closed from 14.12.2020 to 04.01.2021 for the Christmas Holidays. Last shipping day in 2020 is 11.12.2020. Please plan ahead.

Merry Chrsitmas and happy new year!

Yours sincerely

Your EXP-Tech team


Pololu Tic T825 USB Multi-Interface Stepper Motor Controller

Pololu Tic T825 USB Multi-Interface Stepper Motor Controller
€27.74 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

Order within the next 9 hours and 6 minutes so the order will be shipped today .
  • Pololu
  • EXP-R25-895
  • 3131
  • 11
  • US
  • 85423990
  • 0.005
The Tic T825 is based on the DRV8825 IC from Texas Instruments. It can operate from 8.5 V to 45... more

The Tic T825 is based on the DRV8825 IC from Texas Instruments. It can operate from 8.5 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (absolute maximum is 2.5 A per phase). It has reverse protection for motor power supplies up to 40 V. This version is sold unassembled so soldering is necessary to use it.

A version is also available that requires no soldering to use as the terminal blocks and main header pins are already installed.

Features:

  • Open-loop speed or position control of one bipolar stepper motor
  • A variety of control interfaces:
    • USB for direct connection to a computer
    • TTL serial operating at 5 V for use with a microcontroller
    • I²C for use with a microcontroller
    • RC hobby servo pulses for use in an RC system
    • Analog voltage for use with a potentiometer or analog joystick
    • Quadrature encoder input for use with a rotary encoder dial, allowing full rotation without limits (not for position feedback)
    • STEP/DIR inputs for compatibility with existing stepper motor control firmware
  • Acceleration and deceleration limiting
  • Maximum stepper speed: 50,000 steps per second
  • Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds with reduced resolution).
  • Six different microstep resolutions: full step, half step, 1/4 step, 1/8 step, 1/16 step, and 1/32 step
  • Digitally adjustable current limit
  • Optional safety controls to avoid unexpectedly powering the motor
  • Input calibration (learning) and adjustable scaling degree for analog and RC signals
  • 5 V regulator (no external logic voltage supply needed)
  • Optional kill switch inputs
  • Connects to a computer through USB via a USB A to Micro-B cable (not included)
  • Free configuration software available for Windows, Linux, and macOS

Specifications:

  • Motor driver: DRV8825
  • Control interface: USB; non-inverted TTL serial; I²C; RC servo pulses; analog voltage; quadrature encoder
  • Minimum operating voltage: 8.5 V
  • Maximum operating voltage: 45 V
  • Continuous current per phase: 1.5 A
  • Maximum current per phase: 2.5 A
  • Maximum step rate: 50000 PPS
  • Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32
  • Reverse voltage protection?: Y
  • Header pins soldered: N

Documents:

Viewed