Dear customers,

please note that our office and warehouse will be closed 16.12.2019 to 05.01.2020. The orders during this time will be shipped on 06.01.2020.

Enjoy all the sweet moments this wonderful holiday season and new year!

Yours sincerely

Your EXP-Tech team


Article successfully added.

Pololu Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

Pololu Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
€24.63 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • Pololu
  • EXP-R25-905
  • 3132
  • 6
  • US
  • 85423190
  • 0.01
P Secure bonuspoints now
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor... more

The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a TI DRV8834 driver and male headers and terminal blocks are soldered. It can operate from 2.5 V to 10.8 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2 A max with sufficient additional cooling).

Features:

  • Open-loop speed or position control of one bipolar stepper motor
  • A variety of control interfaces
  • Acceleration and deceleration limiting
  • Maximum stepper speed: 50,000 steps per second
  • Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds with reduced resolution).
  • Six different microstep resolutions: full step, half step, 1/4 step, 1/8 step, 1/16 step, and 1/32 step
  • Digitally adjustable current limit
  • Optional safety controls to avoid unexpectedly powering the motor
  • Input calibration (learning) and adjustable scaling degree for analog and RC signals
  • 5 V regulator (no external logic voltage supply needed)
  • Optional kill switch inputs
  • Connects to a computer through USB via a USB A to Micro-B cable (not included)
  • Free configuration software available for Windows, Linux, and macOS
  • Comprehensive user’s guide

Specs:

  • Motor driver: DRV8834
  • Control interface: USB; non-inverted TTL serial; I²C; RC servo pulses; analog voltage; quadrature encoder
  • Minimum operating voltage: 2.5 V
  • Maximum operating voltage: 10.8 V
  • Continuous current per phase: 1.5 A
  • Maximum current per phase: 2 A
  • Maximum step rate: 50000 PPS
  • Microstep resolutions:full, 1/2, 1/4, 1/8, 1/16, and 1/32
  • Reverse voltage protection?: Y
  • Header pins soldered: Y

Documents:

 

Viewed