CP2102 USB UART Board (type A)

€4.60 *

Prices plus VAT plus shipping costs

15 Stück ready for shipment

  • Waveshare
  • EXP-R63-164
  • 7605
  • CN
  • 85423919
  • 0.013
The CP2102 USB UART Board (type A) is an accessory board that features the single-chip USB to... more

The CP2102 USB UART Board (type A) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.

Features:

  • Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...
  • Voltage output support: 5V or 3.3V
  • Integrated USB protection device: SP0503
  • 3 LEDs: TXD LED, RXD LED, POWER LED
  • Pins accessible on pinheaders: TXD, RXD, RTS, CTS
  • Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)

How to Use:

  • VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
  • GND: connects to GND
  • TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
  • RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
  • RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
  • CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)

Package Content:

  • CP2102 USB UART Board (type A) × 1
  • 4-pin male pinheader & 4-pin female pinheader × 2
  • 6-pin custom connector jumper wire × 1
Ra-02-1.png LoRa Ra-02
€6.88 *
XCore2530-1_600x600.jpg XCore2530
€12.00 *
teensy40_front_600x600.jpg Teensy 4.0
€22.50 *
Viewed