Article successfully added.

2.5-9V Fine-Adjust Step-Up/Step-Down Voltage Regulator S9V11MA

€8.95 *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • Pololu
  • EXP-R25-924
  • 2869
  • 4
  • US
  • 90328900
  • 0.001
P Secure bonuspoints now
The S9V11MA switching step-up/step-down regulator efficiently produces a finely adjustable... more

The S9V11MA switching step-up/step-down regulator efficiently produces a finely adjustable output between 2.5 V and 9 V whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The compact (0.5″ × 0.6″) module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.

Features:

 

  • Input voltage: 2 V to 16 V (note: this regulator requires 3 V to start, but it can operate down to 2 V after startup)
  • Output voltage: 2.5 V to 9 V (precision-adjustable using built-in 12-turn potentiometer)
  • Typical maximum continuous output current: 1.5 A (when input voltage is close to the output; the Typical efficiency and output current section below shows how the achievable continuous output current depends on the input and output voltages)
  • Power-good indicator can be used to tell when the regulator has reached and is maintaining its target output voltage
  • Power-saving feature maintains high efficiency at low currents (quiescent current is less than 1 mA while enabled and approximately 7 µA per volt on VIN when regulator is disabled)
  • Integrated over-temperature and short-circuit protection
  • Small size: 12.7 × 15.3 × 6.4 mm

 

Specifications:

  • Minimum operating voltage: 2 V
  • Maximum operating voltage: 16 V
  • Maximum output current:1.5 A
  • Minimum output voltage:2.5 V
  • Maximum output voltage: 9 V
  • Reverse voltage protection?: N
  • Maximum quiescent current: 1 mA
Viewed