Dear customers,

We have summer vacation from 15 Aug 2022 to 19 Aug 2022

The orders during the vacation will be processed on 22 Aug 2022. Please plan ahead.

Yours sincerely

EXP-Tech team


0J9841-1200_600x600.jpg

Pololu Tic T249 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)

€61.95 *

Prices plus VAT plus shipping costs

26 Stück ready for shipment

  • Pololu
  • EXP-R25-1295
  • 3138
  • US
  • 85423190
  • 0.008
The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor... more

The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates a Toshiba TB67S249FTG driver with innovative and unique features that include Automatic Gain Control, and male headers and terminal blocks are already soldered. It can operate from 10 V to 47 V and can deliver up to approximately 1.8 A per phase without a heat sink or forced air flow (or 4.5 A max with sufficient additional cooling).

Features:

  • Open-loop speed or position control of one bipolar stepper motor
  • USB for direct connection to a computer
  • TTL serial operating at 5 V for use with a microcontroller
  • I²C for use with a microcontroller
  • RC hobby servo pulses for use in an RC system
  • Analog voltage for use with a potentiometer or analog joystick
  • Quadrature encoder input for use with a rotary encoder dial, allowing full rotation without limits (not for position feedback)
  • STEP/DIR inputs for compatibility with existing stepper motor control firmware
  • Acceleration and deceleration limiting
  • Maximum stepper speed: 50,000 steps per second
  • Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds with reduced resolution)
  • support full step, half step, 1/4 step, 1/8 step, 1/16 step, and 1/32 step
  • Digitally adjustable current limit
  • Optional safety controls to avoid unexpectedly powering the motor
  • Input calibration (learning) and adjustable scaling degree for analog and RC signals
  • 5 V regulator (no external logic voltage supply needed)
  • Optional limit switch inputs with homing capabilities
  • Optional kill switch inputs
  • STEP/DIR outputs for controlling external stepper motor drivers
  • Connects to a computer through USB via a USB A to Micro-B cable (not included)
  • Free configuration software available for Windows, Linux, and macOS

Specifications:

  • Motor driver: TB67S249FTG
  • Control interface: USB; non-inverted TTL serial; I²C; RC servo pulses; analog voltage; quadrature encoder
  • Minimum operating voltage: 10 V
  • Maximum operating voltage: 47 V
  • Continuous current per phase: 1.8 A
  • Maximum current per phase: 4.5 A
  • Maximum step rate: 50000 PPS
  • Microstep resolutions: full, non-circular 1/2, circular 1/2, 1/4, 1/8, 1/16, and 1/32
  • Reverse voltage protection?: Y
  • Connectors soldered?: N
Viewed