Arduino MKR VIDOR 4000

€62.00 *

Prices plus VAT plus shipping costs

5 Stück ready for shipment

Manufacturer: Arduino
Order number: EXP-R08-090
Manufacturer part number: ABX00022
Weight (kg): 0.032

With the MKR VIDOR 4000 you can configure it the way you want; you can essentially create your... more

Close menu

With the MKR VIDOR 4000 you can configure it the way you want; you can essentially create your own controller board. It comes loaded with hardware and potential: an 8 MB SRAM; a 2 MB QSPI Flash chip ? 1 MB allocated for user applications; a Micro HDMI connector; an MIPI camera connector; and Wifi & BLE powered by U-BLOX NINA W10 Series. It also includes the classic MKR interface on which all pins are driven both by SAMD21 and FPGA. Plus, it has a Mini PCI Express connector with up to 25 user programmable pins.

The FPGA contains 16K Logic Elements, 504 KB of embedded RAM, and 56 18x18 bit HW multipliers for high-speed DSP. Each pin can toggle at over 150 MHz and can be configured for functions such as UARTs, (Q)SPI, high resolution/high frequency PWM, quadrature encoder, I2C, I2S, Sigma Delta DAC, etc.

The on-board FPGA can be also used for high-speed DSP operations for audio and video processing. This board also features a Microchip SAMD21. Communication between FPGA and the SAMD21 is seamless.

FPGA Specifications:

FPGA: Intel Cyclone 10CL016
Camera connector: MIPI camera connector
Circuit Operating Voltage: 3.3V
Digital I/O Pins: 22 headers + 25 Mini PCI Express
PWM Pins: All Pins
UART: Up to 7 (depends on FPGA configuration)
SPI: Up to 7 (depends on FPGA configuration)
I2C: Up to 7 (depends on FPGA configuration)
Analog Input Pins: n/a
Analog Output Pins: n/a
External Interrupts: n/a
DC Current per I/O Pin: 4 or 8 mA
Flash Memory: 2 MB
SDRAM: 8 MB
EEPROM: n/a
Clock Speed: 48 MHz - up to 200 MHz
Video Output: Micro HDMI

Microcontroller Specifications:

Microcontroller: Microchip ATSAMD21 (Arm Cortex-M0+ processor)
Wi-Fi: U-blox Nina-W102
(VIN): 5V
Supported Battery: Li-Po Single Cell, 3.7V, 700mAh Minimum
Circuit Operating Voltage: 3.3V
Digital I/O Pins: 22
PWM Pins: 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)
UART: 1
SPI: 1
I2C: 1
Analog Input Pins: 7 (ADC 8/10/12 bit)
Analog Output Pins: 1 (DAC 10 bit)
External Interrupts: 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)
Flash Memory: 256 KB
SRAM: 32 KB
EEPROM: No
Clock Speed: 32.768 kHz (RTC), 48 MHz
LED_BUILTIN: 6
Full-Speed USB Device and Embedded Host: Included
Length: 83 mm
Width: 25 mm
Weight: 32 g