Article successfully added.
Article successfully added.

Adafruit PN532 NFC/RFID Controller Shield for Arduino

Adafruit
Manufacturer:
Adafruit
Order number:
EXP-R15-031
Manufacturer part number:
789
Availability:
1

View additional product data

In stock

Guaranteed shipping date: 15.11.18, if you order within bestellen

€43.90*
Net price: €36.89
Value added tax: €7.01
All prices incl. value added tax
We've taken our popular Adafruit PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The Adafruit NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use! 

NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones 

Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags) 

The Adafruit shield was designed by RF engineers using the best test equipment to create a layout and antenna with 10cm (4 inch) range, the maximum range possible using the 13.56MHz technology. You can easily attach the shield behind a plastic plate with standoffs and still read cards through a (non-metal) barrier. 

This shield is designed to use I2C or SPI communication protocols. I2C is the default, as it uses fewer pins: analog 4 and 5 are used for I2C (of course you can still connect other I2C devices to the bus). Digital #2 is used for "interrupt" notification. This means you don't have to sit there and 'poll' the chip to ask if a target tag has been found, the pin will pull low when a card, phone, etc is within range. You can adjust which pin is used if you need to keep digital #2 for something else. It is also easy to change the shield over to SPI where you can use any 4 digital pins by shorting two solder jumpers on the top of the PCB. Compatible with any "classic" Arduino - NG, Diecimilla, Duemilanove, UNO - as well as Mega R3 or later. For using the I2C interface with Mega R2 or earlier, two wires must be soldered as the I2C pins are in a different location on earlier Megas. 

Comes with: the Adafruit NFC/RFID PN532 shield including a tuned 13.56MHz stripline antenna, 36-pin 0.1" header for attaching the shield to an Arduino.

Tutorials:

Downloads:
Seeed Studio NFC Shield V2.0

€27.10*

Net price: €22.77
Value added tax: €4.33
*including VAT, excluding shipping
Seeed Studio Grove - NFC Tag

€18.30*

Net price: €15.38
Value added tax: €2.92
*including VAT, excluding shipping
Seeed Studio NFC Shield V2.0

€27.10*

Net price: €22.77
Value added tax: €4.33
*including VAT, excluding shipping
Seeed Studio Grove - NFC Tag

€18.30*

Net price: €15.38
Value added tax: €2.92
*including VAT, excluding shipping
13.56MHz RFID/NFC Sticker - 1KB

€2.65*

Net price: €2.23
Value added tax: €0.42
*including VAT, excluding shipping
Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor

€20.90*

Net price: €17.56
Value added tax: €3.34
*including VAT, excluding shipping
Arduino Leonardo (with headers)

€26.75*

Net price: €22.48
Value added tax: €4.27
*including VAT, excluding shipping
FEETECH Standard Servo FS5106B

€7.14*

Net price: €6.00
Value added tax: €1.14
*including VAT, excluding shipping
Raspberry Pi Zero W
Raspberry Pi
Raspberry Pi Zero W

€17.76*

Net price: €14.92
Value added tax: €2.84
*including VAT, excluding shipping
Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2

€20.17*

Net price: €16.95
Value added tax: €3.22
*including VAT, excluding shipping
Wires with Pre-crimped Terminals 10-Pack M-F 15cm Black

€2.80*

Net price: €2.35
Value added tax: €0.45
*including VAT, excluding shipping
Pololu 5V Step-Up/Step-Down Voltage Regulator S9V11F5

€4.76*

Net price: €4.00
Value added tax: €0.76
*including VAT, excluding shipping
Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit

€12.95*

Net price: €10.88
Value added tax: €2.07
*including VAT, excluding shipping
Adafruit DS1307 Real Time Clock Assembled Breakout Board

€7.24*

Net price: €6.08
Value added tax: €1.16
*including VAT, excluding shipping
Raspberry Pi NoIR Camera v2

€24.99*

Net price: €21.00
Value added tax: €3.99
*including VAT, excluding shipping
Aluminum Standoff for Raspberry Pi: 18.6mm Length, M2.5 Thread, M-F (4-Pack)

€1.75*

Net price: €1.47
Value added tax: €0.28
*including VAT, excluding shipping
Machine Screw: M2.5, 6mm Length, Phillips (25-pack)

€1.10*

Net price: €0.92
Value added tax: €0.18
*including VAT, excluding shipping
Adafruit FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards

€14.49*

Net price: €12.18
Value added tax: €2.31
*including VAT, excluding shipping
Feather Stacking Headers - 12-pin and 16-pin female headers

€1.35*

Net price: €1.13
Value added tax: €0.22
*including VAT, excluding shipping
Adafruit Feather M0 Adalogger

€22.50*

Net price: €18.91
Value added tax: €3.59
*including VAT, excluding shipping
Feather Header Kit - 12-pin and 16-pin Female Header Set

€0.99*

Net price: €0.83
Value added tax: €0.16
*including VAT, excluding shipping
Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

€21.50*

Net price: €18.07
Value added tax: €3.43
*including VAT, excluding shipping
Tentacle Shield T1.16 for Arduino (Kit)

€103.53*

Net price: €87.00
Value added tax: €16.53
*including VAT, excluding shipping
Conductivity Kit K=0.1 (fresh Water) 11µs to 3,000µs

€235.00*

Net price: €197.48
Value added tax: €37.52
*including VAT, excluding shipping
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055

€35.36*

Net price: €29.71
Value added tax: €5.65
*including VAT, excluding shipping
Brass M2.5 Standoffs 16mm tall - Black Plated - Pack of 2

€1.85*

Net price: €1.55
Value added tax: €0.30
*including VAT, excluding shipping
Shield stacking headers for Arduino (R3 Compatible)

€1.95*

Net price: €1.64
Value added tax: €0.31
*including VAT, excluding shipping
Pololu 5V, 1A Step-Down Voltage Regulator D24V10F5

€6.55*

Net price: €5.50
Value added tax: €1.05
*including VAT, excluding shipping
EZO Dissolved Oxygen Circuit
Atlas Scientific
EZO Dissolved Oxygen Circuit

€47.51*

Net price: €39.92
Value added tax: €7.59
*including VAT, excluding shipping
MIFARE® Classic 1K RFID/NFC Clear Tag 13.56MHz

€2.70*

Net price: €2.27
Value added tax: €0.43
*including VAT, excluding shipping
MIFARE® Classic 1K (13.56MHz RFID/NFC) Leather Keychain Fob - 1KB

€0.95*

Net price: €0.80
Value added tax: €0.15
*including VAT, excluding shipping
Bone Conductor Transducer with Wires - 8 Ohm 1 Watt

€8.95*

Net price: €7.52
Value added tax: €1.43
*including VAT, excluding shipping
N-channel power MOSFET

€1.75*

Net price: €1.47
Value added tax: €0.28
*including VAT, excluding shipping
Pulse Sensor Amped

€28.50*

Net price: €23.95
Value added tax: €4.55
*including VAT, excluding shipping
Adafruit SI1145 Digital UV Index / IR / Visible Light Sensor

€9.95*

Net price: €8.36
Value added tax: €1.59
*including VAT, excluding shipping
Stereo Enclosed Speaker Set - 3W 4 Ohm

€8.20*

Net price: €6.89
Value added tax: €1.31
*including VAT, excluding shipping
Pololu 5V Step-Up/Step-Down Voltage Regulator S18V20F5

€14.20*

Net price: €11.93
Value added tax: €2.27
*including VAT, excluding shipping
Arduino Stackable Header Kit - R3

€1.50*

Net price: €1.26
Value added tax: €0.24
*including VAT, excluding shipping
0.1" (2.54mm) Crimp Connector Housing: 2x10-Pin 5-Pack

€1.95*

Net price: €1.64
Value added tax: €0.31
*including VAT, excluding shipping
0.1" (2.54mm) Crimp Connector Housing: 2x8-Pin 5-Pack

€0.95*

Net price: €0.80
Value added tax: €0.15
*including VAT, excluding shipping
0.1" (2.54mm) Crimp Connector Housing: 2x5-Pin 5-Pack

€0.58*

Net price: €0.49
Value added tax: €0.09
*including VAT, excluding shipping
0.1" (2.54mm) Crimp Connector Housing: 2x4-Pin 10-Pack

€0.75*

Net price: €0.63
Value added tax: €0.12
*including VAT, excluding shipping
0.1" (2.54mm) Crimp Connector Housing: 2x2-Pin 10-Pack

€0.55*

Net price: €0.46
Value added tax: €0.09
*including VAT, excluding shipping
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack

€0.48*

Net price: €0.40
Value added tax: €0.08
*including VAT, excluding shipping