Article successfully added.
Article successfully added.

Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit

Adafruit
Manufacturer:
Adafruit
Order number:
EXP-R15-151
Manufacturer part number:
1438
Availability:
9

View additional product data

In stock

Guaranteed shipping date: 18.06.19, if you order within .

€21.36*
Net price: €17.95
Value added tax: €3.41
All prices incl. value added tax
The original Adafruit Motorshield kit is one of our most beloved kits, which is why we decided to make something even better. We have upgraded the shield kit to make the bestest, easiest way to drive DC and Stepper motors. This shield will make quick work of your next robotics project! We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements: 

Instead of a L293D darlington driver, we now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well. 

Instead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Leonardo and Mega R3. (Due's Wire support is still in beta, but once that works well we can test it on the Due) 

Completely stackable design: 5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors! What on earth could you do with that many steppers? I have no idea but if you come up with something send us a photo because that would be a pretty glorious project. 

Lots of other little improvements such as a polarity protection FET on the power pins and a bit of prototyping area. And the shield is assembled and tested here at Adafruit so all you have to do is solder on straight or stacking headers and the terminal blocks. 

Lets check out these specs again:
  • 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!
  • 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
  • Motors automatically disabled on power-up
  • Big terminal block connectors to easily hook up wires (18-26AWG) and power
  • Arduino reset button brought up top
  • Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
  • Tested compatible with Arduino UNO, Leonardo, ADK/Mega R3, Diecimila & Duemilanove. Works with Mega/ADK R2 and earlier with 2 wire jumpers.
  • Download the easy-to-use Arduino software library, check out the examples and you're ready to go!
Comes with an assembled & tested shield, terminal block, plain header, jumper. Some soldering is required to assemble the headers on. Stacking headers not included, but we sell them in the shop so if you want to stack shields, please pick them up at the same time. Arduino and motors are not included but we have lots of motors in the shop and all our hobby servos, DC motors, and stepper motors work great. 


Dimensions, assembled: 
  • 70mm x 55mm x 10mm 2.7"x2.1"x0.4"
Documents:
Seeed Studio Motor Shield V2.0

€17.80*

Net price: €14.96
Value added tax: €2.84
*including VAT, excluding shipping
Mini Maestro 24-Channel USB Servo Controller (Assembled)

€45.46*

Net price: €38.20
Value added tax: €7.26
*including VAT, excluding shipping
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max

€8.03*

Net price: €6.75
Value added tax: €1.28
*including VAT, excluding shipping
SparkFun Haptic Motor Driver - DRV2605L

€8.33*

Net price: €7.00
Value added tax: €1.33
*including VAT, excluding shipping
Seeed Studio Motor Shield V2.0

€17.80*

Net price: €14.96
Value added tax: €2.84
*including VAT, excluding shipping
Mini Maestro 24-Channel USB Servo Controller (Assembled)

€45.46*

Net price: €38.20
Value added tax: €7.26
*including VAT, excluding shipping
Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max

€8.03*

Net price: €6.75
Value added tax: €1.28
*including VAT, excluding shipping
SparkFun Haptic Motor Driver - DRV2605L

€8.33*

Net price: €7.00
Value added tax: €1.33
*including VAT, excluding shipping
Stepper motor - NEMA-17 200 steps/rev, 12V 350mA

€14.99*

Net price: €12.60
Value added tax: €2.39
*including VAT, excluding shipping
Arduino Uno R3
Arduino
Arduino Uno R3

€21.66*

Net price: €18.20
Value added tax: €3.46
*including VAT, excluding shipping
Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors

€3.50*

Net price: €2.94
Value added tax: €0.56
*including VAT, excluding shipping
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, M3 Holes (2-Pack)

€6.30*

Net price: €5.29
Value added tax: €1.01
*including VAT, excluding shipping
Arduino Stackable Header Kit - R3

€1.50*

Net price: €1.26
Value added tax: €0.24
*including VAT, excluding shipping
Arduino Uno SMD R3

€19.04*

Net price: €16.00
Value added tax: €3.04
*including VAT, excluding shipping
Small Reduction Stepper Motor - 5VDC 32-Step 1/16 Gearing

€5.30*

Net price: €4.45
Value added tax: €0.85
*including VAT, excluding shipping
Pololu Universal Aluminum Mounting Hub for 5mm Shaft, #4-40 Holes (2-Pack)

€6.65*

Net price: €5.59
Value added tax: €1.06
*including VAT, excluding shipping
HNP12-090 9V 1.33A DC Wallplugin Adapter 12W

€7.80*

Net price: €6.55
Value added tax: €1.25
*including VAT, excluding shipping
Stackable Header Kit for Arduino R3 (15mm long legs)

€1.65*

Net price: €1.39
Value added tax: €0.26
*including VAT, excluding shipping
Breadboard 400 (300/100)

€3.70*

Net price: €3.11
Value added tax: €0.59
*including VAT, excluding shipping
Stepper Motor Mount with Hardware - NEMA-17 Sized

€9.58*

Net price: €8.05
Value added tax: €1.53
*including VAT, excluding shipping
65 pcs Breadboard Jumper Wires with F/M connectors

€3.50*

Net price: €2.94
Value added tax: €0.56
*including VAT, excluding shipping
75 pcs Breadboard Jumper Wires with M/M connectors

€3.50*

Net price: €2.94
Value added tax: €0.56
*including VAT, excluding shipping
Arduino Leonardo (with headers)

€21.42*

Net price: €18.00
Value added tax: €3.42
*including VAT, excluding shipping
SparkFun Ultrasonic Sensor - HC-SR04

€4.46*

Net price: €3.75
Value added tax: €0.71
*including VAT, excluding shipping
Shield stacking headers for Arduino (R3 Compatible)

€2.08*

Net price: €1.75
Value added tax: €0.33
*including VAT, excluding shipping
Adafruit Proto Shield for Arduino Kit - Stackable Version R3

€10.65*

Net price: €8.95
Value added tax: €1.70
*including VAT, excluding shipping
NEMA 17 Stepper Motor SM-42BYG011-25

€17.49*

Net price: €14.70
Value added tax: €2.79
*including VAT, excluding shipping
USB Cable 2.0 A-Plug to B-Plug 1.8m

€1.79*

Net price: €1.50
Value added tax: €0.29
*including VAT, excluding shipping
Stepper Motor: Bipolar, 200 Steps/Rev, 35x28mm, 10V, 500mA

€12.31*

Net price: €10.34
Value added tax: €1.97
*including VAT, excluding shipping
Female DC Power adapter - 2.1mm jack to screw terminal block

€2.14*

Net price: €1.80
Value added tax: €0.34
*including VAT, excluding shipping
1x40 Pin Break Away Headers - Straight

€0.95*

Net price: €0.80
Value added tax: €0.15
*including VAT, excluding shipping
Power HD Standard Servo 6001HB

€12.95*

Net price: €10.88
Value added tax: €2.07
*including VAT, excluding shipping
Power HD Mini Servo HD-1711MG

€9.95*

Net price: €8.36
Value added tax: €1.59
*including VAT, excluding shipping
Power HD Standard Servo 3001HB

€9.95*

Net price: €8.36
Value added tax: €1.59
*including VAT, excluding shipping
Snap-Action Switch with 16.7mm Lever: 3-Pin, SPDT, 5A

€1.25*

Net price: €1.05
Value added tax: €0.20
*including VAT, excluding shipping
Snap-Action Switch with 50mm Lever: 3-Pin, SPDT, 5A

€1.45*

Net price: €1.22
Value added tax: €0.23
*including VAT, excluding shipping
FEETECH Standard Servo FS5103B

€5.95*

Net price: €5.00
Value added tax: €0.95
*including VAT, excluding shipping
Micro-USB Cable 2m

€2.90*

Net price: €2.44
Value added tax: €0.46
*including VAT, excluding shipping
Small Reduction Stepper Motor - 12VDC 32-Step 1/16

€5.30*

Net price: €4.45
Value added tax: €0.85
*including VAT, excluding shipping
Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180)

€14.94*

Net price: €12.55
Value added tax: €2.39
*including VAT, excluding shipping
Micro Servo - MG90S High Torque Metal Gear

€10.65*

Net price: €8.95
Value added tax: €1.70
*including VAT, excluding shipping
Premium Male/Male Jumper Wires - 40 x 6" (150mm)

€4.23*

Net price: €3.55
Value added tax: €0.68
*including VAT, excluding shipping
HNP15-050L6 5V 2.8A Steckernetzteil 15W

€11.82*

Net price: €9.93
Value added tax: €1.89
*including VAT, excluding shipping
DC Toy / Hobby Motor - 130 Size

€2.08*

Net price: €1.75
Value added tax: €0.33
*including VAT, excluding shipping
Large Enclosed Piezo Element w/Wires

€1.01*

Net price: €0.85
Value added tax: €0.16
*including VAT, excluding shipping
4-AA Battery Holder

€1.25*

Net price: €1.05
Value added tax: €0.20
*including VAT, excluding shipping
Raspberry Pi 3 Model B - 1GB RAM

€39.95*

Net price: €33.57
Value added tax: €6.38
*including VAT, excluding shipping
Adafruit 8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards

€10.65*

Net price: €8.95
Value added tax: €1.70
*including VAT, excluding shipping