Dear customers,

please note that our office and warehouse will be closed 16.12.2019 to 05.01.2020. The orders during this time will be shipped on 06.01.2020.

Enjoy all the sweet moments this wonderful holiday season and new year!

Yours sincerely

Your EXP-Tech team


Article successfully added.

Crazyflie Bold Flight Controller

This product is currently not available.
Please inform me as soon as the product is available again.
€190.40 *

Prices incl. VAT plus shipping costs

Delivery time approx. 5 working days

  • Bitcraze
  • EXP-R75-024
  • 114991537
  • 0
  • CN
  • 85423190
  • 0.1
P Secure bonuspoints now
The Crazyflie Bolt is a Crazyflie 2.X compatible flight controller for brushless builds. It is... more

The Crazyflie Bolt is a Crazyflie 2.X compatible flight controller for brushless builds. It is intended to have the strengths of the Crazyflie 2.1, but in a slightly bit bigger package. It uses the same sensors as the Crazyflie 2.1 and the firmware binaries are compatible with both.

Features:

  • Firmware compatible with Crazyflie 2.1 and Crazyflie Bolt
  • Supports expansion boards with automatic detection
  • Integrated radio with dual antenna support (no firmware support yet)
  • Wireless firmware updates
  • Dual-MCU architecture with dedicated radio/power management SoC for advanced applications
  • Real-time logging, graphing and variable setting in addition to full use of expansion boards when using a Crazyradio or Crazyradio PA and a computer
  • Integrated power distribution (max 8A / motor)
  • Low latency IMU connection
  • Low power mode (down to 50uA) in sleep


Mechanical specifications:

  • PCBA size (WxHxD): 35x9x42mm (including connectors but not battery wire)
  • Weight: 7.3 g (PCBA only), 9.2 g (PCB + battery cable)
  • Battery cable length: 50 mm
  • ESC cable length: 60 mm
  • Antenna length: 150 mm
  • Standard mounting (M3 mounting holes spaced 30.5 mm in square)


Electrical specifications:

  • Voltage input 1S-4S (3V to 17V)
  • Deep sleep consumption down to 50 uA


Radio specifications:

  • 2.4GHz ISM band radio
  • 20 dBm radio amplifier
  • Bluetooth Low Energy support with iOS and Android clients available (tested on iOS 7.1+ and Android 4.4+)
  • Dual antenna support (2 x uFL connector)


Microcontrollers:

  • STM32F405 main application MCU (Cortex-M4, 168MHz, 192kb SRAM, 1Mb flash)
  • nRF51822 radio and power management MCU (Cortex-M0, 32Mhz, 16kb SRAM, 128kb flash)
  • uUSB connector
  • Full speed USB device interface
  • Partial USB OTG capability (USB OTG present but no 5V output)
  • 8KB EEPROM


IMU:

  • 3 axis gyro (BMI088)
  • 3 axis accelerometer (BMI088)
  • 3 axis magnetometer (BMI088)
  • high precision pressure sensor (BMP388)


Supported clients/controllers:

  • Win/Linux/OSX python client
  • Android mobile device
  • iOS mobile device


Interfaces:

  • 1 x Full speed uUSB
  • 2 x Crazyflie expansion connectors (see blow)
  • 2 x u.FL connectors
  • 4 x ESC connectors using PWM / OneShot125 (JST-PH)
  • 1 x XT30 battery connector


Expansion connectors:

  • VCC (3.0V, max 100mA)
  • GND
  • VCOM (5V, max 400mA)
  • VUSB (both for input and output)
  • I2C (400kHz)
  • SPI
  • 2 x UART
  • 4 x GPIO/CS for SPI
  • 1-wire bus for expansion identification
  • 2 x GPIO connected to nRF51


Package contents:

  • 1 x Crazyflie Bolt (with battery cable attached)
  • 1 x External antenna (with u.FL connector)
  • 4 x ESC connector cables
  • 2 x Short male deck connectors (spare part)
  • 2 x Long male deck connectors (spare part)
Viewed