Liebe Kunden,

vom 15.08.2022 bis 19.08.2022 befinden wir uns in Betriebsferien. Bestellungen werden von uns noch bis zum 12.08.2022 versendet. Alle Bestellungen nach diesem Zeitpunkt werden erst wieder ab dem 22.08.2022 versendet. Wir möchten Sie bitten, dies in Ihrer Bestellplanung zu berücksichtigen.

Ihr EXP-Tech Team
DO1200.jpg

DO1200 Galvanic Dissolved Oxygen Sensor

217,00 € *

zzgl. MwSt. zzgl. Versandkosten

2 Stück sofort versandfertig

  • Sensorex
  • EXP-R37-033
  • DO1200
  • US
  • 90318080
  • 0.1
Sensorex DO1200 galvanic dissolved oxygen sensors measure the oxygen content of water using an... mehr
Sensorex DO1200 galvanic dissolved oxygen sensors measure the oxygen content of water using an electrochemical measurement principle. Built in an economical but durable 12mm epoxy body, these sensors are suitable for portable or benchtop use. The DO1200 can also be installed inline for continuous monitoring applications by upgrading to a PTFE membrane cap. The sensor is compatible with Sensorex FC75P 3/4 inch in-line fitting for mounting into 3/4 inch FNPT threaded tees.
  • Galvanic (electrochemical) measurement principle
  • Replaceable membrane cap and fill solution
  • 12mm durable epoxy body
  • For benchtop, portable, or inline use
Specifications: 
  • Range: 0-20mg/L
  • Materials: Epoxy and Noryl
  • Membrane Materials: HDPE (lab) or PTFE (inline)
  • Saturation Output: HDPE = 47mV +/- 9mV, PTFE = 33mV+/-9mV
  • Response Time: After Equilibration – HDPE 1 minute for 2mV, PTFE 2 minutes for 2mV
  • Temperature: 0-50°C
  • Pressure: 0-7.5 bar
Zuletzt angesehen