Olimex SHIELD-EKG-EMG Electrocardiography Electromiography

20,00 € *

zzgl. MwSt. zzgl. Versandkosten

3 Stück sofort versandfertig

Hersteller: Olimex
Artikel-Nr.: EXP-R14-050
Herstellernummer: SHIELD-EKG-EMG
Herkunftsland: BG
Zolltarifnummer: 85423990
Gewicht (kg): 0.046

This is EKG/EMG shield which allow Arduino like boards to capture Electrocardiography... mehr

Menü schließen

This is EKG/EMG shield which allow Arduino like boards to capture Electrocardiography Electromiography signals. The shield opens new possibilities to experiment with bio feedback. You can monitor your heartbeat and log your pulse, recognize gestures by monitoring and analizyng the muscule activity as done in this project.

Features:

stackable headers up to 6 channel may be stack and wired to A0-A6 analogue inputs

calibration signal generation by D4/D9 digital output

preciese Trimmer potentiometer for calibration (all boards are shipped completely assembled, tested and calibrated so you should not do this unless you wat to see how things works)

Input connector for normal or Active electrodes

works with both 3.3V and 5V Arduino boards

Documents:

SHIELD-EKG-EMG Users manual Revision-D

Hardware:

SHIELD-EKG-EMG schematic in PDF format released under Creative Commons Attribution-Share Alike 3.0 United States License
SHIELD-EKG-EMG schematic and board in Eagle format released under Creative Commons Attribution-Share Alike 3.0 United States License

Software:

Electric guru monitoring software, created by Rob Sacks
Arduino example for EKG capture and interface to Electric Guru for OLIMEXINO-328/Arduino boards
Maple example for EKG capture and interface to Electric Guru for OLIMEXINO-STM32
Pinguino example for EKG capture and interface to Electric Guru for PIC32-PINGUINO/OTG/MX220 (refer to the readme and the comments in the code for more info)

Links