Pololu 9V 600mA Step-Down Voltage Regulator D24V6F9

9,20 € *

zzgl. MwSt. zzgl. Versandkosten

5 Stück sofort versandfertig

Hersteller: Pololu
Artikel-Nr.: EXP-R25-033
Herstellernummer: 2108
Herkunftsland: US
Zolltarifnummer: 90328900
Gewicht (kg): 0.004

These buck (step-down) voltage regulators generate lower output voltages from input voltages as... mehr

Menü schließen

These buck (step-down) voltage regulators generate lower output voltages from input voltages as high as 42 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 90%, which is much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large. This regulator is available with a fixed 3.3 V, 5 V, 9 V, or 12 V output, and two versions are available for each voltage, one with a 300 mA maximum output current (D24V3Fx) and one with a 600 mA maximum output current (D24V6Fx)

The regulator has short-circuit protection, and thermal shutdown prevents damage from overheating. The board does not have reverse-voltage protection.

If you need more output current, consider our D15V35F5S3 and D15V70F5S3 3.3V/5V step-down voltage regulators, which can typically deliver a continuous 3.5 A and 7 A, respectively.

Features:

Input voltage: [output voltage + dropout voltage] to 42 V (see below for more information on dropout voltage)
Fixed 3.3 V, 5 V, 9 V, or 12 V output (depending on regulator version) with 4% accuracy
Maximum output current: 300 mA or 600 mA (depending on regulator version)
550 kHz switching frequency
2 mA typical no-load quiescent current (20 ?A typical quiescent current with SHDN = LOW)
Integrated over-temperature and over-current shutoff
Small size: 0.5? × 0.4? × 0.1? (13 mm × 10 mm × 3 mm)

Dimensions:

Size: 0.4? × 0.5? × 0.1?1
Weight: 0.5 g1

Specifications:

Minimum operating voltage: 10.5 V²
Maximum operating voltage: 42 V
Maximum output current: 600 mA
Output voltage: 9 V
Reverse voltage protection?: N
Maximum quiescent current: 2 mA³

Notes:

1. Without included optional headers.
2. For small loads; input voltage must be at least 11.5 V to get the full 600 output.
3. While enabled (SHDN = HIGH) with no load. Current draw is approximately 20 µA when SHDN = LOW.

Links

Weitere Artikel von Pololu