Pololu 5V, 2.5A Step-Down Voltage Regulator D24V25F5

Vorschau: pololu-5v-d24v25f5-voltage-regulator-04_600x600.jpg

Vorschau: pololu-5v-d24v25f5-voltage-regulator-02_600x600.jpg

Vorschau: pololu-5v-d24v25f5-voltage-regulator-01_600x600.jpg

Vorschau: pololu-5v-d24v25f5-voltage-regulator-03_600x600.jpg

10,50 € *

zzgl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

Bestellen Sie innerhalb der nächsten 1 Tage 16 Stunden und 28 Minuten damit die Bestellung am Montag verschickt wird.

Hersteller: Pololu
Artikel-Nr.: EXP-R25-399
Herstellernummer: 2850
Verfügbarkeit: 35
Herkunftsland: US
Zolltarifnummer: 90328900
Gewicht (kg): 0.004

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to... mehr

Menü schließen

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7? × 0.7?, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors. High efficiencies are maintained at light loads by dynamically changing the switching frequency, and an optional shutdown pin enables a low-power state with a current draw of a few hundred microamps.

Features:

Input voltage: 6 V to 38 V (see below for more details on the regulator?s dropout voltage, which affects the low end of the operating range)
Fixed 5 V output (with 4% accuracy)
Typical maximum continuous output current: 2.5 A
Integrated reverse-voltage protection, over-current protection, over-temperature shutoff, soft-start, and under-voltage lockout
Typical efficiency of 85% to 95%, depending on input voltage and load; the switching frequency automatically changes at light loads to maintain high efficiencies
700 ?A typical no-load quiescent current; can be reduced to 10 µA to 20 µA per volt on VIN by disabling the board
Compact size: 0.7? × 0.7? × 0.35? (17.8 mm × 17.8 mm × 8.8 mm)
Two 0.086? mounting holes for #2 or M2 screws

Links

Weitere Artikel von Pololu