Der Artikel wurde erfolgreich hinzugefügt.

6V, 5.5A Step-Down Voltage Regulator D36V50F6

6V, 5.5A Step-Down Voltage Regulator D36V50F6
22,04 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

Bestellen Sie innerhalb der nächsten 19 Stunden und 59 Minuten damit die Bestellung morgen verschickt wird.
  • Pololu
  • EXP-R25-1450
  • 4092
  • 2
  • US
  • 85423190
  • 0.007
This powerful synchronous switching step-down (or buck) regulator takes an input voltage of up... mehr

This powerful synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 6 V. The board measures only 1″ × 1″ yet delivers typical maximum continuous output currents between 3.3 A and 8 A, depending on the input voltage, which makes it well suited for powering moderate to large loads. An optional enable input with a precise cutoff threshold can be used to put the regulator in a low-power state with a current draw of 10 µA to 20 µA per volt on VIN. The regulator also features reverse voltage protection and a power-good output that indicates when the regulator cannot adequately maintain the output voltage.

Features:

  • Input voltage: 6.5 V to 50 V
  • Output voltage: 6 V with 4% accuracy
  • Typical maximum continuous output current: 3.3 A to 8 A
  • Typical efficiency of 80% to 95%, depending on input voltage, output voltage, and load
  • Switching frequency: ~500 kHz under heavy loads
  • Power-save mode with ultrasonic operation that increases light load efficiency by reducing switching frequency, but keeps it above the audible range (20 kHz)
  • 2 mA to 4 mA typical no-load quiescent current
  • Enable input with precise cutoff threshold for disconnecting the load and putting the regulator into a low-power state that draws approximately 10 µA to 20 µA per volt on VIN
  • “Power good” output indicates when the regulator cannot adequately maintain the output voltage
  • Output undervoltage and overvoltage protection
  • Soft-start feature limits inrush current and gradually ramps output voltage
  • Integrated reverse-voltage protection up to 40 V, over-current and short-circuit protection, over-temperature shutoff
  • Compact size: 25.4 mm × 25.4 mm × 9.5 mm
  • Three 0.086″ mounting holes for #2 or M2 screws


Specifications:

  • Minimum operating voltage: 6.5 V
  • Maximum operating voltage: 50 V
  • Continuous output current: 5.5 A
  • Output voltage:    6 V
  • Reverse voltage protection?: Y
  • Maximum quiescent current: 4 mA
  • Output type: fixed 6V
Zuletzt angesehen