
9V, 5A Step-Down Voltage Regulator D36V50F9
- Hersteller: Pololu
- Artikel-Nr.: EXP-R25-1452
- Herstellernummer: 4094
- Herkunftsland: US
- Zolltarifnummer: 85423190
- Gewicht (kg): 0.007
This powerful synchronous switching step-down (or buck) regulator takes an input voltage of up... mehr
This powerful synchronous switching step-down (or buck) regulator takes an input voltage of up to 50 V and efficiently reduces it to 9 V. The board measures only 1? × 1? yet delivers typical maximum continuous output currents between 2.7 A and 7 A, depending on the input voltage, which makes it well suited for powering moderate to large loads. An optional enable input with a precise cutoff threshold can be used to put the regulator in a low-power state with a current draw of 10 µA to 20 µA per volt on VIN. The regulator also features reverse voltage protection and a power-good output that indicates when the regulator cannot adequately maintain the output voltage.
Features:
- Input voltage: 9.9 V to 50 V
- Output voltage: 9 V with 4% accuracy
- Typical maximum continuous output current: 2.7 A to 7 A
- Typical efficiency of 80% to 95%, depending on input voltage, output voltage, and load
- Switching frequency: ~500 kHz under heavy loads
- Power-save mode with ultrasonic operation that increases light load efficiency by reducing switching frequency, but keeps it above the audible range (20 kHz)
- 2 mA to 4 mA typical no-load quiescent current
- Enable input with precise cutoff threshold for disconnecting the load and putting the regulator into a low-power state that draws approximately 10 µA to 20 µA per volt on VIN
- ?Power good? output indicates when the regulator cannot adequately maintain the output voltage
- Output undervoltage and overvoltage protection
- Soft-start feature limits inrush current and gradually ramps output voltage
- Integrated reverse-voltage protection up to 40 V, over-current and short-circuit protection, over-temperature shutoff
- Compact size: 25.4 mm × 25.4 mm × 9.5 mm
- Three 0.086? mounting holes for #2 or M2 screws
Specifications:
- Minimum operating voltage: 9.9 V
- Maximum operating voltage: 50 V
- Continuous output current: 5 A
- Output voltage: 9 V
- Reverse voltage protection?: Y
- Maximum quiescent current: 4 mA
- Output type: fixed 9V
Zuletzt angesehen