Adafruit Pro Trinket - 5V 16MHz

AdafruitSKU: EXP-R15-472

Preis:
Sonderpreis9,87 €

Exkl. MwSt. zzgl. Versand

Lagerbestand:
Nur noch 6 verfügbar

Hersteller-Artikelnummer: 2000
Zolltarifnummer: 85423990
Herkunftsland: US

Schneller Versand innerhalb 24h
Versand aus Deutschland
Verschlüsselte Zahlung

Beschreibung

Das Adafruit Pro Trinket 5V vereint alles was Sie am Trinket lieben mit der Vertrautheit des gemeinsamen Arduino-Chips (ATmega328). Das Board ist wie ein Arduino Pro Mini nur mit mehr Pins und USB.

Das Pro Trinket wurde entworfen, da bei manchen Projekten das herkömmliche Trinket nicht mehr ausreicht. Manchmal benötigt man einfach mehr Pins, mehr FLASH und mehr RAM. Deshalb wurde das Trinket Pro mit 18 GPIOs, 2 zusätzlichen analoge Eingängen und 28K Flash und 2K RAM entworfen.

Das Pro Tinket verfügt über USB-bootloading-Support und kommt mit einer MicroUSB-Buchse. Des Weiteren kommt es mit Optiboot-Support, so dass es über USB als auch über ein FTDI-Kabel programmiert werden kann.

Das Pro Trinket PCB misst nicht nur 1,5 "x 0,7" x 0,2 "(ohne Header), sondern besitzt auch viele Funktionen des Arduino UNO. Dadurch können Sie Arduino-Uno-Projekte von der Größe her deutlich verkleinern.

Die Pro trinket 5V verwendet einen ATMEGA328P Chip mit der gleichen Geschwindigkeit und Spannung, der auch vom Arduino UNO / Duemilanove / Mini / etc verwendet wird.

Produktvideo:

Hier einige Dinge, die Sie wissen sollten, wenn Sie Arduino-Sketches verwenden wollen:
  • Pins #2 and #7 are not available (they are exclusively for USB)
  • The onboard 5V regulator can provide 150mA output, not 800mA out
  • You cannot plug shields directly into the Pro Trinket
  • There is no Serial-to-USB chip onboard. This is to keep the Pro Trinket small and inexpensive, you can use any FTDI cable to connect to the FTDI port for a Serial connection. The USB connection is for uploading new code only.
  • The bootloader on the Pro Trinket use 4KB of FLASH so the maximum sketch size is 28,672 bytes. The bootloader does not affect RAM usage.
  • Trinket is not supported on Linux operating system at this time - try Mac OS or Windows!

Spezifikationen:
  • ATmega328P onboad chip in QFN package
  • 16MHz clock rate, 28K FLASH available
  • USB bootloader with a nice LED indicator looks just like a USBtinyISP so you can program it with AVRdude and/or the Arduino IDE (with a few simple config modifications).
  • Also has headers for an FTDI port for reprogramming
  • Micro-USB jack for power and/or USB uploading, you can put it in a box or tape it up and use any USB cable for when you want to reprogram.
  • On-board 5.0V power regulator with 150mA output capability and ultra-low dropout. Up to 16V input, reverse-polarity protection, thermal and current-limit protection.
  • Power with either USB or external output (such as a battery) - it'll automatically switch over
  • On-board green power LED and red pin #13 LED
  • Reset button for entering the bootloader or restarting the program.
  • Works with 99% of existing Arduino sketches (anything that doesn't use more than 28K, and doesn't require pins #2 and #7)
  • Mounting holes! Yeah!

Technische Details:
  • Dimensions:38mm x 18mm x 2mm / 1.5" x 0.7" x 0.08"
  • Height with MicroUSB: 4mm / 0.16"
  • Weight: 2.6g
  • Datasheet

Einführung:

Verschlüsselte Zahlung

American Express Apple Pay Google Pay Maestro Mastercard PayPal Shop Pay Union Pay Visa

Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu Ihren Kreditkartendaten.

Zusätzliche Informationen

Zolltarifnummer:
85423990

Herkunftsland:
US

Das hängt davon da, wo Sie sich befinden. Nach Übergabe der Bestellung an UPS beträgt die Lieferzeit in Deutschland ca. 2-3 Tage, innerhalb Europas ca. 1 Woche.

Wir versenden unsere Artikel mit unserem Versandpartner UPS.

Kundenservice

+49 (0)681 9659 0150

Kontaktieren Sie uns

info@exp-tech.de

Könnte Ihnen auch gefallen
Zuletzt angesehen