Liebe Kunden,

vom 14.12.2020 bis einschließlich dem 04.01.2021 befinden wir uns in Betriebsferien. Bestellungen werden von uns noch bis zum 11.12.2020 versendet.

Bitte beachten Sie daher, dass die Lieferung von Backorder-Bestellungen eventuell erst im neuen Jahr stattfindet.

Frohe Weihnachten und einen guten Rutsch ins neue Jahr wünscht,

Ihr EXP-Tech Team

SparkFun Qwiic Shield for Teensy - Extended

6,96 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

Bestellen Sie innerhalb der nächsten 20 Stunden und 9 Minuten damit die Bestellung morgen verschickt wird.
  • Sparkfun
  • EXP-R05-1355
  • DEV-17156
  • 8
  • US
  • 85423190
  • 0.005
The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter... mehr

The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Teensy boards. This shield is sized to work with the footprint of Teensy 4.1, Teensy 3.6, and Teensy 3.5. This shield connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Teensy to four SparkFun Qwiic connectors (two horizontally and two vertically mounted). The Qwiic ecosystem allows for easy daisy chaining so, as long as your devices are on different addresses, you can connect as many Qwiic devices as you'd like.

We have also added a "PROG" button on this shield that is electrically parallel with the "PROG" button on the Teensy Boards so you can choose to use either the button on your Teensy or the button on the shield to put your Teensy into Programming mode.

The Qwiic Shield for Teensy comes with two 24-pin and one 5-pin headers and will need to solder the headers to the shield and, if necessary, to your Teensy board. Take care to match the markings on the Qwiic Shield to the appropriate pins on your Teensy to avoid possibly damaging your boards.

Includes:

  • SparkFun Qwiic Shield for Teensy - Extended
  • 2x 24-pin headers
  • 1x 5 pin header


Features:

  • Teensy 4.1, 3.6, or 3.5 Footprint Compatible
  • 4x Qwiic Connection Ports
  • "PROG" Button w/ satisfying tactile feedback
  • I2C Jumper
  • 3.3V and GND Buses
Zuletzt angesehen