Pololu Distance Sensor with Pulse Width Output, 130cm Max

13,53 € *

zzgl. MwSt. zzgl. Versandkosten

29 Stück sofort versandfertig

  • Pololu
  • EXP-R25-1525
  • 4071
  • US
  • 85423190
  • 0.01
This small lidar-based distance sensor reports the distance of objects up to about 130 cm away... mehr
This small lidar-based distance sensor reports the distance of objects up to about 130 cm away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. The sensor works over an input voltage range of 3.0 V to 5.5 V, and the 2.54mm pin spacing makes it easy to use with standard solderless breadboards and 2.54mm perfboards.

Note: The maximum range of 130 cm is only achievable for high-reflectance objects in good ambient conditions. Lower-reflectivity targets or poor ambient conditions will reduce the maximum range.

Specifications:
  • Operating voltage: 3.0 V to 5.5 V
  • Current consumption: 30 mA (typical) when enabled, 0.4 mA when disabled
  • Maximum range: approximately 130 cm (for high-reflectivity targets in good ambient conditions; lower-reflectivity targets or poor ambient conditions will reduce the maximum detection range)
  • Minimum range: 4 cm (for accurate measurement); < 1 mm (for detection)
  • Update rate: 100 Hz to 110 Hz (10 ms to 9 ms period)
  • Field of view (FOV): 15° typical; can vary with object reflectance and ambient conditions
  • Output type: digital pulse width
  • Dimensions: 21.6 × 8.9 × 3.5 mm
  • Weight: 0.4 g

Important note: This product might ship with a protective liner covering the sensor IC. The liner must be removed for proper sensing performance.

Zuletzt angesehen