Charge Pump Voltage Inverter: 1.8-5.3V, 60mA

Menge Stückpreis
bis 4 2,12 € *
ab 5 1,95 € *
ab 25 1,80 € *
ab 100 1,65 € *

zzgl. MwSt. zzgl. Versandkosten

100 Stück sofort versandfertig

  • Pololu
  • EXP-R25-1518
  • 2839
  • US
  • 90328900
  • 0.002
This board is a charge pump voltage inverter that converts an input voltage between 1.8 V and 5.3... mehr
This board is a charge pump voltage inverter that converts an input voltage between 1.8 V and 5.3 V to a corresponding negative output voltage, with a typical efficiency of over 80%. The inverter can deliver a continuous output current of 60 mA across most of its operating range, making it a simple solution for applications requiring a lower-power negative supply, including sensor biasing and bipolar op-amp circuits.

Unlike a voltage regulator, which produces a constant output voltage from a range of input voltages, this inverter does not have a set output voltage; the module’s negative output voltage varies proportionally to the positive input voltage that it receives. However, you can get a regulated negative voltage by powering the inverter with a pre-regulated supply voltage. For example, with a fixed 5 V supply, the module produces a fixed -5 V on its output; with a 3.3 V input, the output is -3.3 V. Note that the magnitude of the output voltage decreases as the output current increases; please see the graphs at the bottom of this page for a more detailed characterization.

Features:
  • Input voltage: 1.8 V to 5.3 V
  • Negative output voltage is inverted from input
  • Typical continuous output current: 60 mA
  • <200 µA typical no-load quiescent current
Zuletzt angesehen