ESP-32-C3-13U.JPG

AI-Thinker ESP-C3-13U

Menge Stückpreis
bis 99 2,92 € *
ab 100 2,70 € *
ab 400 2,48 € *
ab 800 2,26 € *
ab 1600 2,15 € *

zzgl. MwSt. zzgl. Versandkosten

derzeit nicht auf Lager, bestellbar

  • AI-Thinker
  • EXP-R59-030
  • ESP-C3-13U
  • CN
  • 85423990
  • 0.005
Characteristics: Support Wi-Fi 802.11b/g/n, 1T1R mode data rate up to 150Mbps. ... mehr
Characteristics:

  • Support Wi-Fi 802.11b/g/n, 1T1R mode data rate up to 150Mbps. 
  • Support BLE5.0, and rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps.
  • 32-bit RISC-V single-core processor, supports a clock frequency of up to 160MHz, with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM
  • Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter
  • SMD-18 package
  • Integrated Wi-Fi MAC/ BB/RF/PA/LNA/BLE
  • Support multiple sleep modes, deep sleep electric current is less than 5uA UART rate up to 5Mbps
  • Support STA/AP/STA+AP mode and mix mode
  • Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click networkconfiguration
  • Support UART port local upgrade and remote firmware upgrade (FOTA)
  • General AT commands can be better understand
  • Support secondary development, integrated Linux development environment
  • ESP-C3-13U module acquiesce in using the built-in 4MByte Flash, meanwhile support external Flash version

Specifications:

  • Model Name: ESP-C3-13U
  • Package: SMD-18
  • Size: 14.0*18.0*3.1(±0.2)mm
  • Antenna: IPEX
  • Frequency Range: 2400 ~ 2483.5MHz
  • Operating Temperature: -40°C ~ 85°C
  • Store Temperature: -40°C ~ 125°C , < 90%RH
  • Power supply range: Supply voltage: 3.0V ~ 3.6V, Supply current >500mA
  • Support Interface: UART/GPIO/ADC/PWM/I2C/I2S
  • IO: IO0, IO1, IO2, IO3, IO4, IO5, IO6, IO7, IO8, IO9, IO10, IO18, IO19, IO20, IO21
  • UART Rate: Support 110 ~ 4608000 bps, default 115200 bps
  • Bluetooth: BLE 5.0
  • Security: WEP/WPA-PSK/WPA2-PSK
  • SPI Flash: Default 4MByte, support 2MByte version
Zuletzt angesehen