Dear customers,

our store will be closed from 20/12/2018 to 03/01/2019. All orders after this time will be shipped again from 03.01.2019. We would like to ask you to consider this in your order planning!

A Merry Christmas and a Happy New Year wishes you
Your EXP-Tech team
Article successfully added.
Article successfully added.
Order number:
Manufacturer part number:

View additional product data

In stock

Guaranteed shipping date: 16.12.18, if you order within bestellen

Net price: €15.08
Value added tax: €2.87
All prices incl. value added tax
General AVR ISP Programmer
The Pololu USB AVR Programmer is an extremely compact, low-cost in-system programmer (ISP) for Atmel’s AVR mirocontrollers, which makes this device an attractive programming solution for AVR-based controllers like Pololu Orangutan robot controllers. The USB AVR programmer connects to your computer’s USB port via an included USB A to mini-B cable and communicates with your programming software, such as Atmel Studio or AVRDUDE, through a virtual COM port using the AVRISPV2/STK500 protocol. The programmer connects to your target device via an included 6-pin ISP programming cable (the older, 10-pin ISP connections are not directly supported, but it’s easy to create or purchase a 6-pin-to-10-pin ISP adapter).
Supported Microcontrollers
The programmer should work with all AVRs that can be programmed with the AVR ISP interface, but it has not been tested on all devices. It has been tested with all Orangutan robot controllers and the 3pi Robot. The programmer features upgradable firmware, allowing updates for future devices. It does not currently work with Atmel’s XMega line of microcontrollers.
The programmer is powered by the 5V USB power bus, and it is intended for programming AVRs that are running at close to 5 V (note that the programmer does not deliver power to the target device).
Supported Operating Systems
The programmer has been tested under Windows XP, Windows Vista, Windows 7, Windows 8, and Linux. We provide limited support for using this programmer on Mac OS X; please see the user’s guide for details. This programmer is not compatible with older versions of Windows.
Bonus Feature: TTL-level serial port
The USB AVR programmer doubles as a USB-to-serial adapter. The programmer installs as two virtual COM ports: one for communicating with programming software and one for the general-purpose USB-to-serial adapter. This means that you can seamlessly switch between programming an AVR and debugging it through the TTL serial port without having to open and close your terminal program. In addition to the serial transmit (TX), and receive (RX), lines, the programmer lets you use pins A and B as serial handshaking lines. The programmer’s configuration utility allows you to select which handshaking line is assigned to which pin, and both input and output handshaking lines are supported. The programmer also gives you access to the USB’s regulated 5V power bus through the VBUS pin. The TTL-level serial port is not supported in Mac OS.
Bonus Feature: SLO-scope
This device can also act as a two-channel, severely limited oscilloscope (SLO-scope) using the A and B pins as analog voltage inputs and the Pololu SLO-scope application for Windows. The SLO-scope can measure voltages between 0 and ~5 V (the maximum is limited by the USB bus voltage), or higher if you use an external voltage divider, and it supports two sampling modes: 10 kHz sampling of two 8-bit analog inputs or 20 kHz sampling of one 7-bit analog input and one digital input. This feature can help you debug your circuits and firmware by seeing what the voltages are doing at various nodes. (Please note that the SLO-scope feedback is quite limited and is not intended as a substitute for a real oscilloscope or a good multimeter, which will have much higher input impedance, better resolution and range, and higher sampling frequency.) The SLO-scope is not supported in Mac OS or Linux.
Included Accessories
The Pololu USB AVR Programmer ships with a 12" (30 cm) 6-pin ISP programming cable and a 6’ (1.8 m) USB A to mini-B cable. It does not ship with software or documentation, but software (including drivers) and documentation can be found under the resources tab.
Note: This programmer supports standard in-system programming (ISP), which is also sometimes called in-circuit serial programming (ICSP). It does not support JTAG, DebugWire, or High-Voltage programming.
Pololu USB AVR Programmer v2


Net price: €8.36
Value added tax: €1.59
*including VAT, excluding shipping
Pololu USB AVR Programmer v2


Net price: €8.36
Value added tax: €1.59
*including VAT, excluding shipping
Seeed Studio Grove - LoRa Radio 433MHz


Net price: €11.10
Value added tax: €2.11
*including VAT, excluding shipping
Entlötpumpe, High Quality


Net price: €3.95
Value added tax: €0.75
*including VAT, excluding shipping
8x2 Character LCD - Black Bezel (Parallel Interface)


Net price: €6.76
Value added tax: €1.28
*including VAT, excluding shipping
Pololu 3pi Roboter with ATmega328 Mikrocontroller


Net price: €75.59
Value added tax: €14.36
*including VAT, excluding shipping
Pololu A4988 Stepper Motor Driver Carrier, Black Edition


Net price: €5.38
Value added tax: €1.02
*including VAT, excluding shipping
Ribbon Cable - 10 wire (15ft)


Net price: €4.45
Value added tax: €0.85
*including VAT, excluding shipping
Ribbon Crimp Connector - 10-pin (2x5, Female)


Net price: €0.42
Value added tax: €0.08
*including VAT, excluding shipping
Pocket AVR Programmer PGM-09825


Net price: €15.20
Value added tax: €2.89
*including VAT, excluding shipping